The next stage of the application process is to take meter readings for the utilities in the property and provide the details of the local authority.
Gas or Oil Reading
To submit the Gas or Oil reading first select the gas / Oil section in the top left.
To submit the gas reading, select the gas provider in the upper selection box then type in the meter readings as displayed on the meter. If you are unable to find the supplier you may select the "Cant find the provider?" button to type in the provider.
Oil readings may be input if the property has an Oil tank, this can be done by selecting the "Oil Reading" button
You may indicate how much is remaining in the tank by a percentage and add a description for your records.
Water Reading
To submit the water reading first select the water provider in the upper selection box then type in the meter readings as displayed on the meter. If you are unable to find the supplier you may select the "Cant find the provider?" button to type in the provider.
Electricity Reading
Select the provider and enter the reading as you have done with the other utilities. The electricity reading also allows for additional readings to be submitted to accommodate properties that have day / night readings or on and off peak readings. To add additional readings you can select the ‘Add Additional Reading’ button.
You may now enter a description for the type of reading and the reading itself, once done select the green "Save" button to save these details.
Local Authority
In the lower right you may select the local authority
Select the local authority the property is located in to have them notified of the new tenant
Once all readings are entered and the local authority selected click ‘Confirm Submission’
You will see confirmation of the submissions similar to the above.
Note - You may skip a utility and no submission will be made
To continue select the green "next" button